High End Pinball Restorations – The Pinball Company

White Water Pinball Machine by Williams – High End Restoration – Additional Pictures Available Upon Request

Our high end restoration games are truly a pinball collectors dream.  Each machine is completely restored to better than new condition.  Pristine cabinets, backglass, and playfields are the result of over 100 hours of detailed craftsmanship and new, high-quality materials.  These highly collectable machines looks like a new machine coming off the assembly line. They also have clear-coated playfields that protect the playfield from wear and will make your showpiece last a lifetime.  We are in an elite class of companies who can offer these completely restored machines. 

High End Restoration Process:

• Remove everything from Playfield and Cabinet
• Tumble and polish all hardware
• Sand off old cabinet artwork to bare wood
• Bondo and repair cabinet (several times)
• Tape off inside bottom of cabinet and paint whole cabinet
• Prep cabinet surface for decals
• Install decals and trim off excess
• Set cabinet up on legs for reassembly
• Install brand new ground braid
• Disassemble power box and transformer, clean, paint and reassemble
• Install new button(s), flipper button switches, new coindoor, new siderails, new lockdown bar receiver, new head head hinges, new bolts/nuts
• Install head on cabinet
• Disassemble backbox light board, clean harness, paint light board, and reassemble
• Disassemble board panel, paint, rebuild and clean all boards, and reassemble
• Disassemble speaker panel, clean/paint, install new DMD, new speaker panel plastic, reinstall in head.
• Install cabinet harness (cleaned)

Playfield Work:

• Install all new tnuts in new/clearcoated playfield by hand
• Paint and install wooden siderails
• Install all new pop bumper parts, playfield support rails, playfield hangers
• Disassemble all playfield assemblies, tumble all brackets and hardware, clean all coils and install new coil wrappers, brand new plungers, coil sleeves, etc.
• Install completed assemblies on playfield
• Install tumbled/polished posts, rubbers
• Clean and regrain all ball guides
• Clean all lamp boards and install LED’s
• Disassemble all playfield plastics and install new plastic set
• Disassemble ramp(s), clean harnesses, polish hardware, replace switches, reassemble on brand new ramp
• Clean all wiring harnesses by hand, let dry, reinstall on playfield
• Reinstall playfield in cabinet and make any necessary adjustments

Why Shop With Arcade Games Shop?

• ✔ Fully Serviced & Pre-Tested by Arcade Technicians
• ✔ Secure, Insured Freight Shipping
• ✔ Dedicated Customer Support